derivative shortcut Archives | Jake's Math Lessons

Implicit Differentiation

Before getting into implicit differentiation, I would like to take some time to discuss variables, functions, and constants. The reason for this is that when you do an implicit differentiation problem, you will likely be dealing with equations containing multiple letters.

Up to this point, most of the functions you have taken the derivative of usually contain one variable, usually $x$ , and any other letters in the function would be constants. But with implicit differentiation, you will also need to deal with having another letter that represents another unknown function.

Before you start implicitly differentiating a problem I recommend determining whether each letter represents a function, or if it’s a variable or a constant. This is because each one will be treated differently when you take its derivative. Since implicit differentiation is essentially just taking the derivative of an equation that contains functions, variables, and sometimes constants, it is important to know which letters are functions, variables, and constants, so you can take their derivative properly.

In many cases, the problem will tell you if a letter represents a constant. If a letter is a constant, that means you would treat it like it’s a number. If this is a little confusing, just imagine what would happen if you were to actually put some number in for the constant and think about what would happen to that number when you take the function’s derivative. Then revert back to having the letter in the equation and treat the constant the same way you treated the number.

Let’s jump into an example and I will explain the process along the way.

Example 1

Find the derivative of $f(x)=cx^2+d$ where $c$ and $d$ are constants.

What to do with constants?

Like I said before, since $c$ and $d$ are constants, we can treat them as if they are just some number and take the derivative of the remaining function with $x$ being the variable.

Let’s imagine $c$ and $d$ have been replaced with $2$ and $4$ respectively, and see what happens.

$$f(x)=2x^2+4$$

This is a case where we can just use the power rule to find:

$$f'(x)=2(2x)=4x$$

Now, we can revert back to having $c$ and $d$ in our function and we would see that:

$$f(x)=cx^2+d$$

$$f'(x)=c(2x)$$

$$f'(x)=2cx$$

Notice, the $d$ disappeared because the derivative of a constant is just $0$ .

What about functions and variables?

Now that we have discussed some methods for identifying constants and how to deal with them when taking a derivative, I will discuss indicators for classifying letters that represent functions and those that are variables.

Frequently, when doing an implicit differentiation problem, you will simply be asked to find $\frac{dy}{dx}$ . Then you will be shown some equation that contains at least one $y$ and at least one $x$ . Although this seems like you haven’t been given much direction, the $\frac{dy}{dx}$ is actually an indicator that gives us all the information we need. This notation is one way to write:

The derivative of $y$ with respect to $x$ .

Or in other words, it’s telling you that you are trying to find the derivative of your function, $y$ , with respect to the variable, $x$ . Which tells you that $y$ is a function of $x$ .

In fact, this notation will always give you those two pieces of information. For example, $\frac{dh}{dt}$ is a symbol that represents “the derivative of $h$ with respect to $t$ .” Therefore, $h$ must be a function and $t$ must be its variable.

Example 2

Find $\frac{dy}{dx}$ if $y^2=4x^5-e^x$ .

In a problem like this, since we know we need to find $\frac{dy}{dx}$ and we are given an equation which relates $y$ and $x$ , we need to find the derivative of both sides of the equation.

$$y^2=4x^5-e^x$$

Now we can take the derivative of both sides. Remember, as long as we do the same thing to both sides of an equation, the results will be equal to each other also.

$$\frac{d}{dx}\big[y^2\big]=\frac{d}{dx}\big[4x^5-e^x\big]$$

The Left Side of the Equation:

The $\frac{d}{dx}$ just means that you need to take the derivative of whatever follows, treating $x$ as the variable. The left side of this equation is the tricky part. Since the question told us to find $\frac{dy}{dx}$ , we know that $y$ is a function of $x$ . The fact that $y$ is a function tells us that we can’t just use the power rule to find the derivative of the left side of the equation. We will actually need to use the chain rule.

We need to do the chain rule because $y$ is not a variable here. Since $y$ is a function of $x$ and we are taking the derivative with respect to $x$ , we cannot say that the derivative of $y^2$ is $2y$ ! Now that we have determined that we need to use the chain rule, we need to determine our inside and outside functions. Remember, we need to figure out some $f(x)$ and a $g(x)$ so that $f\big(g(x)\big)=y^2$ (if you need a refresher on the chain rule, click here).

Typically, when we have a letter that represents a function and we take its derivative with respect to a different variable, we can call our inside function just the single letter which represents a function. Therefore, we can say our inside function is $g(x)=y$ .

Now, to find our outside function, we can look at the entire function and replace the inside function with a single $x$ . We are replacing it with an $x$ because that is the variable we are differentiating with respect to. So if we take our function ( $y^2$ ) and replace the inside function ( $y$ ) with a single $x$ , we are left with our outside function $f(x)=x^2$ . At this point we have figured out:

$$f(x)=x^2,$$

$$g(x)=y.$$

The next thing we need to do is find the derivative of both our inside and outside functions. Finding $f'(x)$ can be found simply using the power rule:

$$f'(x)=2x.$$

Now we need to find $g'(x)$ . This is a little more tricky. The key thing, which I will continue to remind you of, is that we are taking the derivative of $y$ with respect to $x$ . Therefore, we cannot say that the derivative of $y$ is $1$ .

In fact, we do not know the derivative of $y$ . Since $y$ is some function of $x$ that we actually don’t know, we can’t explicitly write its derivative either. But luckily, we don’t need to be able to do this. All we need to say is that the derivative of $y$ is the symbol I mentioned earlier which represents “the derivative of $y$ with respect to $x$ .” We can simply use $\frac{dy}{dx}$ to represent this. Therefore, we know that:

$$g'(x)=\frac{dy}{dx}.$$

Now we can just use these pieces and plug them into the chain rule formula.

$$\frac{d}{dx}\big[y^2\big]=f’\big(g(x)\big)\cdot g'(x)$$

$$\frac{d}{dx}\big[y^2\big]=2(y)\cdot \frac{dy}{dx}$$

$$\frac{d}{dx}\big[y^2\big]=2y\frac{dy}{dx}$$

The Right Side of the Equation:

Finding $\frac{d}{dx}\big[4x^5-e^x\big]$ is quite a bit easier than the left side of the equation. Since this side contains no other letters besides $x$ , which is the variable we are differentiating with respect to, this will be like any other derivative we have taken up to this point.

$$\frac{d}{dx}\big[4x^5-e^x\big]=4(5x^4)-e^x$$

$$\frac{d}{dx}\big[4x^5-e^x\big]=20x^4-e^x$$

Putting It All Together:

Back to our original equation, we had:

$$\frac{d}{dx}\big[y^2\big]=\frac{d}{dx}\big[4x^5-e^x\big].$$

And as we just showed above, this means:

$$2y\frac{dy}{dx}=20x^4-e^x.$$

Now, once we have taken the derivative of both sides, you can see that our equation contains a $\frac{dy}{dx}$ . Since our goal here is to find $\frac{dy}{dx}$ , now that we have an equation that contains it, all we have to do is solve for $\frac{dy}{dx}$ .

All we have to do is divide both sides by $2y$ .

$$\frac{2y\frac{dy}{dx}}{2y}=\frac{20x^4-e^x}{2y}$$

Once we simplify the left side we are left with

$$\frac{dy}{dx}=\frac{20x^4-e^x}{2y}.$$

Although this looks a little strange, since our equation for $\frac{dy}{dx}$ contains both $x$ and $y$ , this is sometimes the best we can do. Implicit differentiation is most useful in the cases where we can’t get an explicit equation for $y$ , making it difficult or impossible to get an explicit equation for $\frac{dy}{dx}$ that only contains $x$ . Therefore, we have our answer!

I would like to point out that this example is actually a case where we could have solved for $y$ in terms of $x$ before taking the derivative. Doing this would have meant that we could have used other derivative tricks and avoided implicit differentiation, but the way I solved it shows the process of implicit differentiation which is applicable in cases where it is absolutely necessary.

In those cases the general idea and process is the same: we have some function that relates $y$ and $x$ and we need to take the derivative of both sides, then use algebra to solve for $\frac{dy}{dx}$ . This may not always be as simple as the above example, but the process will be extremely similar.

Example 3

Find $\frac{dy}{dx}$ if $y=x^x$ .

This problem is going to be a bit more tricky than the first two examples. Click here to see the full solution.

More Examples

$\mathbf{1. \ \ ycos(x) = x^2 + y^2}$ | Solution

$\mathbf{2. \ \ xy=x-y}$ | Solution

$\mathbf{3. \ \ x^2-4xy+y^2=4}$ | Solution

$\mathbf{4. \ \ \sqrt{x+y}=x^4+y^4}$ | Solution

$\mathbf{5. \ \ e^{x^2y}=x+y}$ | Solution

As always, don’t forget to let me know if you have any questions on this lesson or if you have any suggestions for other lessons you want to see in the future. Go check out my derivatives page to see what other material I’ve covered. I want to know what you want to see on this site, so any and all suggestions and questions are welcome if you can’t find an answer to your question in another lesson. Just go ahead and leave a comment on this post or email me at jakesmathlessons@gmail.com!

The Chain Rule

The chain rule is another trick for taking complex derivatives by breaking them down into simpler parts. Rather than using this when we are multiplying or dividing two functions, we use the chain rule when our complex function can be thought of as plugging one function into another one. These are known as composite functions.

Let’s say we have a function called $h(x)$ which is the composition of two simpler functions, $f(x)$ and $g(x)$ where: $$h(x)=f(g(x)).$$

Then, $$h'(x)=f'(g(x))\cdot g'(x)$$

This is known as the chain rule.

The phrase I use to remember The Chain Rule is:

The derivative of the outside, leave the inside function alone. Then multiply by the derivative of the inside.

Similarly to the product rule and quotient rule, the first thing you need to do after identifying you need to use the chain rule is figure out which part of the function you want to call $f(x)$ and what to call $g(x)$ . Once you figure out which part to call $f(x)$ and $g(x)$ , the rest of the process is almost identical to applying the product and quotient rules.

I would like to show a few examples of how to assign $f(x)$ and $g(x)$ then we can go through one of them all the way to the end.

Example 1

Find the derivative of $h(x)=\sqrt{x^3-4x^2+7x+1}$ .

Recognizing when to use the chain rule

The way I like to think about breaking it down into $f(x)$ and $g(x)$ is to consider which is the outside function and the inside function. In this case, it is pretty clear that we have $x^3-4x^2+7x+1$ all inside of a square root. Therefore, we can think of the square root as the outside function and the $x^3-4x^2+7x+1$ as the inside function. In other words, we are plugging our inside function into our outside function.

Since we can say that the above function, $h(x)$ , can be described by one function being plugged into another function, this tells us that we can use the chain rule to find its derivative.

Determining f and g

As mentioned before, the first thing you need to do is isolate the inside and outside functions. I think that it is usually easier to decide on the inside function first. The reason for this is that the inside function is often surrounded by parenthesis, or in this case, a square root.

So as a result, we can say that our inside function is $$g(x)=x^3-4x^2+7x+1.$$

Once we have figured out our inside function, we need to write everything else that’s left over as an isolated function, which we will call $f(x)$ . The simplest way to do this is look at our original function, $h(x)$ , and replace the entire inside function, $g(x)$ , with a single $x$ .

Since $h(x)=\sqrt{x^3-4x^2+7x+1}$ , all we need to do is replace the entire part which we have called the inside function, which is $x^3-4x^2+7x+1$ , with a single $x$ . The function we are left with after doing this will be our outside function, which will be called $f(x)$ .

Doing this leaves us with:

$$f(x)=\sqrt{x}$$

Now that we have figured out $f(x)$ and $g(x)$ , we just need to figure out $f'(x)$ and $g'(x)$ and plug these functions into the chain rule formula as shown above.

I will work one of these all the way to the end a little later, but for now I’d like to do a couple more examples up to this point.

Example 2

Find the derivative of $h(x)=2sin(x^2+4)$ .

Determining f and g

Like last time, the first thing we need to do is determine what we will call our inside function and our outside function. First we will figure out the inside function. As I said before, the inside function is usually a bit easier to see because an easy place to start is to simply take the part of the function inside parenthesis.

If we do this in this case, we would say that our inside function is $g(x)=x^2+4$ . I would like to point out that this will not always work every time. However, it is a good place to start. You can always come back to this step if you realize your original choice for the inside function doesn’t work well.

If we say that our inside function is the $x^2+4$ part, all we need to do to figure out the outside function is replace that piece with a single $x$ and see what we have left. If we do this, we are left with $f(x)=2sin(x)$ .

Now we have two functions, $f(x)=2sin(x)$ and $g(x)=x^2+4$ , that are much easier to derive. Therefore, we can use these functions, find their derivatives, and put all those pieces into the chain rule formula.

Now I would like to do one example all the way from beginning to end.

Example 3

Find the derivative of $h(x)=\big(x^3+18\big)^{56}$ .

Determining f and g

Just like the first two examples, the first thing we want to do is determine our inside and our outside functions. As before, let’s start with the inside function. This is another case where our inside function is fairly obvious because it’s surrounded by a set of parenthesis. Therefore, we will call our inside function $g(x)=x^3+18$ .

Once we have our inside function, we need to determine our outside function. To do this, we will go back to our original function and replace the inside function with a single $x$ . So we will replace the $x^3+18$ all with a single $x$ . Doing this gives us $f(x)=x^{56}$ .

Dealing with each piece of the formula

Now we have determined our outside and inside functions to be $f(x)=x^{56}$ and $g(x)=x^3+18$ . Now, in order to use the chain rule formula to find the derivative of our original function $h(x)$ we also need to find $f'(x)$ and $g'(x)$ .

Both of these derivatives can be found simply using the power rule. If you can’t remember how to do this, I discussed the power rule in this article here. All you need to do is move the power down in front of the $x$ and lower its power by $1$ .

Doing this gives us:

$$f'(x)=56x^{55}$$

$$g'(x)=3x^2$$

Putting it all together

Now, similarly to the product and quotient rule, once we have the four necessary components we can just plug them into the chain rule formula and simplify. Remember,

$$h'(x)=f'(g(x))\cdot g'(x)$$

Before I proceed I would like to quickly explain what the notation $f'(g(x))$ means. Think about what it means to find, for example, $f(2)$ . All this means is that you need to plug $2$ into your function called $f$ . Or in other words, go to your function $f(x)$ and replace every $x$ with a $2$ . By this same reasoning, $f'(g(x))$ means we need to take our function $f'$ and replace each $x$ with our entire function $g(x)$ . So we will change each $x$ in our equation into $(x^3+18)$ . I suggest putting parenthesis around the entire function when you plug it into each $x$ because this will help make sure you simplify correctly.

Now let’s go ahead and use the formula. We will plug $g(x)$ into $f'(x)$ , then multiply that whole piece by our entire function $g'(x)$ .

$$h'(x)=\Big(56\big(x^3+18\big)^{55}\Big)\Big(3x^2\Big)$$

Now you just want to simplify, and this tells you that our final derivative is:

$$h'(x)=168x^2\big(x^3+18\big)^{55}$$

Enter your email and name below and I’ll send you my calculus 1 study guide straight to your inbox!

Go check out my other lessons on the derivatives page. There’s a lot of topics covered there that are worth taking a look at. You can also see some more practice problems using the chain rule here. And don’t forget, if you have any questions about this article or any suggestions for future lessons I haven’t touched on, leave a comment or email me at jakesmathlessons@gmail.com!

The Quotient Rule

Similar to the product rule, the quotient rule is a tool for finding complex derivatives by breaking them down into simpler pieces. There is one main difference between the two. As the names imply, the product rule is applicable when you need to find the derivative of a function that is actually the product of two simpler functions and the quotient rule is used when your function can be described as one simpler function being divided by another.

Like the product rule, there are a few different ways you might see the quotient rule represented. I recommend picking the one that makes the most sense to you so that you can memorize the formula.

For our functions $f(x)$ and $g(x)$ :

$$\frac{d}{dx}\Bigg[\frac{f(x)}{g(x)}\Bigg]=\frac{\frac{d}{dx}\big[f(x)\big]g(x)-f(x)\frac{d}{dx}\big[g(x)\big]}{\big(g(x)\big)^{2}}$$

$$\Bigg(\frac{f}{g}\Bigg)’=\frac{f’\cdot g-f\cdot g’}{g^2}$$

$$\Bigg(\frac{f(x)}{g(x)}\Bigg)’=\frac{f'(x)\cdot g(x)-f(x)\cdot g'(x)}{g^2(x)}$$

Unlike the product rule, the order does matter here. This is because we are using subtraction and division rather than addition and multiplication. Since we need the pieces to be in the correct order, it is helpful to come up with some method for memorizing the quotient rule as I have shown it above.

How to remember the quotient rule

We need to take the derivative of some function, that can be represented as a fraction made up of two functions that are easier to derive. In other words we will be considering the “top” of the fraction and the “bottom” of the fraction as two separate, simpler functions. The method I like to use to remember this formula is to think of the function in the numerator and the “high” portion and the denominator as the “low” portion. These will be abbreviated as “Hi” and “Lo.”

$$\Bigg(\frac{f(x)}{g(x)}\Bigg)’=\Bigg(\frac{Hi}{Lo}\Bigg)’=\frac{Lo \ dHi-Hi \ dLo}{Lo^2}$$

And if you read it out loud, it almost seems to have a little jingle to it, which makes is easier to remember:

Lo d Hi minus Hi d Lo, all over Lo squared.

Just to add a little clarification, the “d” means you should take the derivative of the following piece. So, “d Hi” should be where you plug in the derivative of the function that makes up the top half of the fraction.

Example 1

Find the derivative of $h(x)=\frac{e^x}{\sqrt{x}}$ .

Recognizing when to use the quotient rule

Just like we did with the product rule example, we want to first recognize how we will split up this function. In other words, we need to recognize which part we will consider $f(x)$ and which part we will consider $g(x)$ . The main difference is that this distinction does matter with the quotient rule. We need to call $f(x)$ our top function and $g(x)$ our bottom function.

Therefore, we need to say $f(x)=e^x$ and $g(x)=\sqrt{x}$ . Once we have made this distinction, we can consider these two functions individually for a moment and find each of their derivatives. I already found these derivatives in Example 1 of The Product Rule. If you want to see this again, click here.

By using the previous example, we already know $f'(x)$ and $g'(x)$ . I recommend writing out $f(x)$ , $f'(x)$ , $g(x)$ , and $g'(x)$ all in one place before using the quotient rule formula. So far we have:

$$f(x)=e^x$$

$$g(x)=\sqrt{x}=x^\frac{1}{2}$$

$$f'(x)=e^x$$

$$g'(x)=\frac{1}{2}x^{-\frac{1}{2}}$$

Putting it all together

Now that we have figured out these four parts, we can simply plug them into the quotient rule formula we have above. This tells us that:

$$h'(x)=\Bigg(\frac{e^x}{\sqrt{x}}\Bigg)’=\frac{\Big(x^\frac{1}{2}\Big)(e^x)-(e^x)\Big(\frac{1}{2}x^{-\frac{1}{2}}\Big)}{\big(\sqrt{x}\big)^2}=\frac{e^x\Big(x^\frac{1}{2}-\frac{1}{2}x^{-\frac{1}{2}}\Big)}{x}$$

$$=e^x\Big(x^{-\frac{1}{2}}-\frac{1}{2}x^{-\frac{3}{2}}\Big)$$

Please don’t forget to leave a comment or email me at jakesmathlessons@gmail.com with any questions or suggestions for future lessons! Also, I recommend going to the derivatives page to see other topics I’ve covered. And you can see more quotient rule practice problems here. Just send me an email if you can’t find what you’re looking for and I’ll see what I can do to help!

Also, enter your name and email in the form below and I’ll send you my calculus 1 study guide as a FREE bonus for joining my email list!

The Product Rule

The product rule is a very useful tool to use in finding the derivative of a function that is simply the product of two simpler functions. There are a few different ways you might see the product rule written. I would recommend picking whichever one is easiest for you to remember and understand so that you can work with it from memory. Although you may only need to remember one of these, you should be able to recognize the other representations as the product rule when you see them. All of the following are different ways of writing the product rule:

Take any two functions f(x) and g(x).

$$\frac{d}{dx} \Big[f(x)g(x) \Big]=f(x) \frac{d}{dx} \Big[g(x) \Big]+g(x) \frac{d}{dx} \Big[f(x) \Big]$$

$$\big(f \cdot g \big)’=f \cdot g’+g \cdot f’$$

$$\big(f(x) \cdot g(x) \big)’=f(x) \cdot g'(x)+g(x) \cdot f'(x)$$

Of course, when you add two things together the order doesn’t matter. In other words $a+b=b+a$ . The same is true for multiplication, $a \cdot b=b \cdot a$ . As a result we can reorder the product rule equations shown above, so

$$\big(f \cdot g \big)’=f’ \cdot g+g’ \cdot f.$$

How to remember the product rule

As long as you multiply the first function with the derivative of the of the second and multiply the second function with the derivative of the first, then add the two together, it will work out. The phrase I like to think about when I need to remember the product rule is:

“The derivative of the first times the second plus the derivative of the second times the first.”

I like that phrasing personally, but I recommend you come up with some trick for remembering the product rule because it comes up frequently.

How to start with the product rule

The next thing that is important to discuss is how to decide which function will be $f(x)$ and which function will be $g(x)$ when you realize you need to use the product rule. As long as you can reduce the full function to the product of two smaller functions, the product rule can be applied and it doesn’t really matter which part of the product you call $f$ and which one you call $g$ .

Let’s consider the following example:

Example 1

Find the derivative of $h(x) = e^x \sqrt{x}$ .

Recognizing when to use product rule

This is perhaps one of the more obvious cases where we can see that the product rule can be used here. This function is simply the product of the two simpler functions: $e^x$ and $\sqrt{x}$ .

How to begin

The first thing we need to do is decide which of those two functions should be $f$ and which will be $g$ . As I mentioned before, this decision doesn’t matter as long as you stick with it through the whole problem (you will have issues if you switch the two half way through the problem).

I will say $f(x)=e^x$ and $g(x)=\sqrt{x}$ . Once you name your $f$ and $g$ functions, the next thing I would recommend doing is figure out the derivative of each.

Dealing with each piece of the formula

Remember, the product rule formula requires the use of $f'$ and $g'$ , so it’s easiest to figure those out now so we can just plug them in.

First we’ll find $f'(x)$ . Luckily this one is easy. The derivative of $e^x$ is also $e^x$ . Or $$\frac{d}{dx}e^{x}=e^{x}$$ Therefore we have $$f'(x)=e^{x}.$$

Now we’ll find $g'(x)$ . This one is a bit more tricky, but keep in mind, there is another way to write $\sqrt{x}$ that makes finding the derivative seem a lot easier. Always remember, $\sqrt{x}$ can also be written as $x^{\frac{1}{2}}$ . $$\sqrt{x}=x^{1/2}.$$ Now that we have it written as $x$ to some power, we can find this derivative using the power rule.

Just move the power down in front and lower the power of $x$ by $1$ . This means $$\frac{d}{dx}x^{\frac{1}{2}}=\frac{1}{2}x^{-\frac{1}{2}}.$$ Therefore, we know

$$g'(x)=\frac{1}{2}x^{-\frac{1}{2}}.$$

Putting it all together

Now we have figured out $f'$ and $g'$ , so we have all the pieces we need to plug into the product rule formula. To summarize, so far we have:

$$f(x)=e^{x}$$

$$g(x)=\sqrt{x}=x^{\frac{1}{2}}$$

$$f'(x)=e^{x}$$

$$g'(x)=\frac{1}{2}x^{-\frac{1}{2}}$$

When you are using the product rule, I would recommend listing out $f$ , $g$ , $f'$ , and $g'$ before trying to plug anything into the power rule formula. It is best to list these out all in one place, like I have done above so it’s easy to refer back to all of the pieces you will need to use.

Now we just need to plug all of these into our product rule formula. I will use $h'(x)=f'(x)\cdot g(x)+g'(x)\cdot f(x)$ , but as I said before, any of the formulas shown previously will work. Use the one with notation that you are most comfortable with.

$$h'(x)=\big(e^{x}\big)\Big(x^{\frac{1}{2}}\Big)+\bigg(\frac{1}{2}x^{-\frac{1}{2}}\bigg)\big(e^{x}\big)$$

This is a perfectly acceptable answer for $h'(x)$ , but we can also simplify this by factoring out an $e^{x}$ . Doing this tells us that:

$$h'(x)=\big(e^{x}\cdot \sqrt{x}\big)’=e^{x}\bigg(x^{\frac{1}{2}}+\frac{1}{2}x^{-\frac{1}{2}}\bigg)$$

Product Rule with 3 Functions

My favorite way to think about using the produce rule with 3 terms is the way it’s explained in The Calculus Lifesaver by Adrian Banner. This book explains everything you need to know in calculus in a very intuitive way that makes a lot of sense when you’re trying to learn calculus and it is very affordable priced under $20 on Amazon. I highly recommend checking that book out.

In that book, Adrian Banner describes how you can actually apply the product rule to find the derivative of a function that is the product of any number of smaller functions.

When it is being applies to 3 functions, the formula is fairly simple and follows the same pattern as using the product rule on only 2 terms.

Let’s say we want to find the derivative of $$f(x)=(x^3+1)(x^4-2x+6)(x^2-x)$$

First we start with assigning each term to a new variable. So let’s say:

$$u=x^3+1$$ $$v=x^4-2x+6$$ $$w=x^2-x$$

Then we can apply these three terms to the product rule formula for 3 terms.

$$f'(x)= \frac{du}{dx}vw + u \frac{dv}{dx} w + uv \frac{dw}{dx}$$

So you can see that we will need to find the derivative of each of our 3 terms individually before we plug them into the product rule formula. All 3 of these derivatives can be found using the power rule.

$$\frac{du}{dx}= 3x^2$$ $$\frac{dv}{dx}= 4x^3-2$$ $$\frac{dw}{dx}= 2x-1$$

And now we can simply plug all of these pieces into the formula to get the derivative.

$$f'(x)= (3x^2)(x^4-2x+6)(x^2-x)$$ $$\ + (x^3+1) (4x^3-2) (x^2-x)$$ $$\ + (x^3+1)(x^4-2x+6) (2x-1)$$

And that’s all there is to it. If you want to get some more practice with derivatives and other rules and shortcuts you should check out the derivatives page. There you will find a list of lesson and full problems I have worked through to help you make sense of derivatives. You can also see more product rule practice problems here. If you can’t find what you’re looking for there then let me know with an email to jakesmathlessons@gmail.com. Send me your questions and I’ll do my best to answer them and may even post a full lesson to address your question.

** Links on this page may be affiliate links meaning I would get a small commission from your purchase at no additional cost to you. **